GUIDES & REFERENCES
Network engineering guides
Each guide answers one design question with the formula, assumptions, a worked example and the failure cases to check, then links to the calculator that does the arithmetic.
Switching & uplink capacity
Oversubscription ratios, N-1 failure capacity, LACP hashing and uplink upgrade decisions.
Learn how to calculate switch oversubscription ratio with 48-port examples, uplink sizing, LAG behavior, N-1 failure, utilization and capacity planning.
Read guide →How to Calculate Oversubscription for a 48-Port SwitchCalculate oversubscription for a 48-port switch with 1G, 2.5G, 10G and 25G uplinks. See 2×10G, 4×10G and N-1 examples, then size the uplink correctly.
Read guide →Is 2×10G Enough for a 48-Port Gigabit Switch?Calculate the theoretical uplink ratio for a 48-port Gigabit switch, then compare 2×10G capacity with estimated busy-hour demand, concurrency and LAG behavior.
Read guide →How to Calculate Switch Uplink Capacity Under N-1 FailureCalculate normal and surviving switch uplink capacity, N-1 oversubscription and busy-hour headroom with practical link and device failure examples.
Read guide →Why Is One LACP Link Congested While the Other Is Idle?Diagnose uneven LACP traffic with member counters, a 2×10G example, hash checks and N-1 capacity. Separate aggregate headroom from actual forwarding.
Read guide →10G vs 25G Switch Uplinks: When Should You Upgrade?Use measured busy-hour demand, growth, capacity reserve, platform compatibility and lifecycle cost to decide when a switch uplink upgrade from 10G to 25G is justified.
Read guide →IP networking & bandwidth
Subnetting, transfer windows and camera network bandwidth with PoE budgets.
Calculate IPv4 subnets from CIDR notation, find network and broadcast addresses, and verify usable host capacity with a repeatable engineering method.
Read guide →How to Calculate Bandwidth and File Transfer TimeEstimate file transfer time from link speed, payload size and protocol overhead, with examples for WAN backups, cloud uploads and NOC planning.
Read guide →IP Camera Network Bandwidth & PoE Planning GuideDeep guide to camera bandwidth, switch uplinks, PoE budgets, NVR storage and N-1 resilience.
Read guide →Optical & PON
Fiber link budgets, splitter cascades and ODN margin.
Plan a fiber link by adding connector, splice and fiber attenuation losses, then reserve engineering margin before comparing the result with transceiver power limits.
Read guide →PON Splitter Loss: Cascade, Insertion Loss and ODN MarginCalculate one-stage or cascaded PON split ratios, splitter insertion loss and ODN margin before checking receive power and reach.
Read guide →Data center cooling
Heat load, cooling capacity, tons of refrigeration and N+1 redundancy.
Calculate data center sensible cooling load from IT power, UPS and PDU losses, lighting, people and room gains, then size precision cooling with N+1 resilience.
Read guide →Server Room Heat Load Calculation: What to IncludeCalculate server-room heat load from IT equipment, electrical losses, lighting, people, envelope gains and margin, with a complete 120 kW example.
Read guide →How Many Tons of Cooling Does a Server Room Need?Convert server-room heat load from kW to refrigeration tons, add room heat gains and margin, then verify precision cooling capacity and redundancy.
Read guide →Data Center Cooling N+1: Capacity Formula & Failure CheckSize N+1 precision cooling for a data center, calculate required and installed units, and verify remaining sensible capacity after one unit fails.
Read guide →Telecom power & energy
Rectifier sizing, recharge current and generator fuel runtime.
Size telecom rectifier modules with load growth, battery recharge peaks, N+1/N+2 redundancy, derating and N-1/N-2 failure checks.
Read guide →How Long Will a Telecom Generator Run on One Tank?Estimate telecom generator runtime from a manufacturer fuel curve, time-varying site load and usable tank fuel. Includes a worked example and key limits.
Read guide →